Research on sub-surface recrystallization of single crystal nickel-based superalloy in micro-milling

Journal of Mechanical Science and Technology - The micro-structure/parts of single crystal nickel-based superalloy materials are extensively used in high temperature environments. The...     

Beam and image experiment of beam deflection electron gun for distributed X-ray sources

Distributed X-ray sources comprise a single vacuum chamber containing multiple X-ray sources that are triggered and emit X-rays at a specific time and location. This process facilitates an application for innovative system concepts in X-ray and computer tomography. This paper proposes a novel electron beam focusing, shaping,and deflection electron gun for distributed X-ray sources.The electron gun uses a dispenser cathode as an electron emitter, a mesh grid to control emission current, and two electrostatic lenses for beam shaping, focusing, and deflection. Novel focusing and deflecting electrodes were designed to increase the number of focal spots in the distributed source. Two identical half-rectangle opening electrodes are controlled by adjusting the potential of the two electrodes to control the electron beam trajectory, and then, multifocal spots are obtained on the anode target. The electron gun can increase the spatial density of the distributed X-ray sources, thereby improving the image quality. The beam experimental results show that the focal spot sizes of the deflected(deflected amplitude 10.5 mm)and non-deflected electron beams at full width at half maximum are 0.80 mm 90.50 mm and 0.55 mm 90.40 mm, respectively(anode voltage 160 kV; beam current 30 mA). The imaging experimental results demonstrate the excellent spatial resolution and time resolution of an imaging system built with the sources, which has an excellent imaging effect on a field-programmable gate array chip and a rotating metal disk.     

分光光度法和光度滴定法联合测定湿法炼锌流程中钴渣浸出液中锌钴镍

湿法炼锌流程中钴渣浸出液中含有高浓度的Fe²⁺和Mn²⁺,用分光光度法测定Co²⁺和Ni²⁺时,Fe²⁺-EDTA会严重干扰Co²⁺和Ni²⁺的测定;在用光度滴定法测定Zn²⁺和Co²⁺合量时,Ni²⁺对二甲酚橙指示剂具有封闭作用,Mn²⁺亦与EDTA螯合,导致滴定结果偏高。为消除Fe²⁺和Mn²⁺对Zn²⁺、Co²⁺和Ni²⁺测定的干扰,实验进行氧化分离Fe²⁺和Mn²⁺预处理,在NaAc/Hac缓冲体系下,以EDTA作显色剂用分光光度法测定Co²⁺、Ni²⁺。在波长466nm处,Co²⁺的线性范围为50~500mg/L时与吸光度呈线性,相关系数R²为0.9992;在384nm处,Ni²⁺的线性范围为50~500mg/L时与吸光度呈线性,相关系数R²为0.9998。根据分光光度法测出Ni²⁺物质的量,加入1.1倍的丁二酮肟以除去Ni²⁺,用二甲酚橙为指示剂,EDTA鳌合-光度滴定法测定Zn²⁺、Co²⁺合量,扣减Co²⁺含量得出Zn²⁺含量。选取4个锌湿法炼锌流程中钴渣浸出液实际样品,按照实验方法中的分光光度法测定Co²⁺和Ni²⁺,光度滴定法测定Zn²⁺、Co²⁺合量,Zn²⁺、Co²⁺和Ni²⁺测定结果的相对标准偏差(RSD,n=6)均不大于0.70%,加标回收率分别为99.59%~100.41%、99.69%~100.64%、99.92%~100.08%。     

MC尼龙重载承压地板井下巷道铺设工艺研究

我国煤矿井下无轨运输混凝土路面铺设成本高，并且受开采应力、巷道底板地质条件等影响，其应用受到限制。重载车辆的频繁碾压极易使路面发生损坏，从而影响正常开采效率还带来高昂的维护费用。为解决这一问题，采用MC尼龙重载承压地板代替传统混凝土铺设路面，进行了MC尼龙重载承压地板井下巷道铺设的工艺研究。通过对承压板井下铺设方案的制定、承压地板型式的研发、地板的整体连接及稳定性研发等，实现了高效的作业效率，更为安全、清洁的作业环境以及更低的成本，进而达到了“以塑代混凝土”的实际示范意义。该铺设工艺为井下无轨运输的采区路面、工作面搬家通道、临时路面以及其他应急路面、硐室地板的应用提供了良好的方案借鉴。     

风电机组传动链典型故障特征提取方法

为解决风电机组传动链易发生故障的问题,文章阐述了风电机组齿轮箱特征频率的计算方法和基于振动信号分析的故障特征提取方法。结合实际情况,以行星级齿轮磨损、中间轴小齿轮崩齿、高速轴齿轮崩齿和发电机轴承电腐蚀等典型故障为例,通过齿轮箱特征频率和传动链典型故障振动信号基本特征分析,可较好地完成故障识别。结果表明,采用经典信号处理方法能对上述典型故障进行特征提取,验证了经典方法对单一、明显故障特征提取的有效性,为深入开展传动链故障特征提取方法研究奠定了基础,为风电机组故障检修维护提供了技术支撑。     

西藏水电开发是应对治理揠塞湖的重要举措

西藏区域地质构造发育,又属于高震区,在局部强降雨强降雪等恶劣小气候条件下,自然灾害频发,在高山深谷的江河上尤其容易发生堰塞湖。2018年10月17日凌晨5:00左右,西藏林芝加拉村下游约6km处(大峡谷核心区、无人区)雅鲁藏布江(以下简称“雅江”)左岸发生大规模泥石流,造成干流断流,形成影响很大的雅江加拉村堰塞湖。堰塞湖的治理一直是个世界难题,本文从2018年10月17日治理分析加拉堰塞湖的实践,阐述从水电开发角度,在灾害区上游建设高坝大库拦水调蓄,水库下游再采取截弯取直方式引走来水,作为防治雅江大峡谷河段今后可能出现大型堰塞湖重要治理手段,防止大型堰塞湖造成水淹城乡和溃堰水淹下游灾难的发生,从而达到既推进雅江水电开发,又较好治理了大峡谷河段自然灾害,实现把水电开发建成“功在当代,利在千秋”的减灾防灾工程。     

β-Cypermethrin Alleviated the Inhibitory Effect of Medium from RAW 264.7 Cells on 3T3-L1 Cell Maturation into Adipocytes

Studies have elucidated that pyrethroids induce adipogenesis. It is also known that macrophages can affect the homeostasis of adipose tissue. However, whether and how the β-cypermethrin (β-CYP)-mediated inhibition of the macrophages affects adipogenesis remain unknown. To explore the effects of β-CYP on adipogenesis through modulating the function of macrophages, 3T3-L1 cells, a preadipocyte cell line, were exposed to culture medium from either RAW 264.7 cells, a macrophage cell line (RM), or β-CYP-treated RAW 264.7 cells (CRM). CRM decreased the inhibitory effects of RM treatment on cell proliferation and adipogenesis, as lipid accumulation, the CEBPA content, and Fasn and Acaca expression in 3T3-L1 cells were higher following CRM treatment than following RM treatment through the higher levels of the demethylated CEBPA promoter in 3T3-L1 cells. However, the medium from β-CYP- and N-acetyl-L-cysteine-cotreated RAW 264.7 cells (CNRM) partially restored the inhibitory effects of RAW 264.7 cells on 3T3-L1 cells that had been reduced by CRM, indicating that β-CYP might reduce the cytotoxicity and inhibitory effects of RAW 264.7 cells on the adipogenesis of 3T3-L1 cells through elevating ROS levels in RAW 264.7 cells. Moreover, exposure to β-CYP downregulated the TNF-α secretion in RAW 264.7 cells. In conclusion, these data demonstrated that β-CYP affected the function of RAW 264.7 cells, alleviating their inhibitory effects on adipogenesis and CEBPA demethylation in 3T3-L1 cells. β-CYP might achieve these effects through downregulating the secretion of TNF-α via elevating ROS levels in RAW 264.7 cells. Our experiments provide a new perspective on the obesogenic effect of pyrethroids.     

Rheology of Cellulose/Alginic Acid Blends with 1-Allyl-3-Methylimidazolium Chloride as Solvent

In this study, cellulose/alginic acid blend solutions were prepared with 1-allyl-3-methylimidazolium chloride as solvent. The effect of cellulose/alginic acid blend ratios on the rheological properties was studied. It was found that the viscosity and dynamic modulus decreased with the increase of alginic acid ratio. And the calculated viscosity values, which were obtained from the log-additivity rule, are less than the experimental viscosity values. This may be caused by the hydrogen bonding interaction between cellulose and alginic acid, which is beneficial to the miscibility of the blends. In order to prove the rheological result, cellulose/calcium alginate films were prepared from the solution, the hydrogen bonding between cellulose and alginate were investigated, which was related to the good miscibility of the blend solutions. POLYM. ENG. SCI., 60: 243–249, 2019. © 2019 Society of Plastics Engineers     

石墨烯改性涂层防护性能研究

为减少团聚，提高石墨烯在涂层中的分散性，研究采用纳米分散技术预先制备了石墨烯分散液，再将其分散至环氧树脂中获得石墨烯改性复合涂层。通过对石墨烯含量为 0、0.3%、0.6%的复合涂层进行盐水浸泡、盐雾、阴极剥离实验及电化学性能测试，证明石墨烯的加入显著增强了涂层的防护性能。石墨烯复合涂层在 3.5%盐水中浸泡 1 008 h后，涂层低频阻抗仍大于 106 Ω·cm²比未添加石墨烯的涂层提高了 3个数量级，且盐雾实验 6 000 h后涂层表面仍保持完好；含 0.6%石墨烯，的涂层耐蚀行为劣于石墨烯含量为 0.3%的涂层。